Here’s how to apply DTF transfers step by step, using the settings Ninja Stitch recommends for its DTF gang sheets.

What You’ll Need

• A heat press. Household irons struggle to deliver the even heat and pressure DTF transfers need, so a heat press gives the most reliable results.
• Your DTF transfers, cut out from your gang sheet with a small margin around each design.
• The garment, clean and dry.
• A protective cover sheet, such as a Teflon sheet or parchment paper.
• Heat-resistant tape (optional) to keep transfers from shifting.
• A lint roller to clear fibers and dust from the print area.

Recommended DTF Heat Press Settings

These settings come from Ninja Stitch’s DTF gang sheet printing process:

Use firm, even pressure. Every press runs a little differently, so test on a scrap garment when you can, and always follow any instructions included with your order.

How to Apply DTF Transfers, Step by Step

1. Preheat your press to between 260°F and 300°F.
2. Prep the garment. Lint roll the print area, then pre-press the garment for a few seconds to remove moisture and wrinkles.
3. Position the transfer. Place the transfer adhesive side down on the garment, with the film on top. Use heat-resistant tape if you need to hold it in place.
4. Cover and press. Lay your cover sheet over the transfer and press for 10 to 15 seconds.
5. Let it cool. DTF transfers use a cold peel, so give the transfer time to cool before you remove the film. Peeling too soon can pull the design off the garment.
6. Peel the film. Peel slowly and smoothly at a low angle. If an edge starts to lift, lay the film back down and press again.
7. Post-press. Cover the design and press for another 2 to 3 seconds. This final press helps the transfer bond fully and improves its durability and feel.

Where to Place Your Design

Good placement makes a custom shirt look professional. On adult tees and hoodies, these common positions are a solid starting point:

• Left chest: a logo about 3 to 4 inches wide, centered over the left chest.
• Full front: center the design about 3 to 4 inches below the collar.
• Full back: center the design about 4 to 5 inches below the back collar.
• Sleeve: center a 2.5 to 3.5 inch design on the upper sleeve.
• Hats and bags: use a smaller design, and for hats, a press or attachment made for curved surfaces.

To keep placement consistent across a whole order, fold each shirt in half to find the center line or use a T-square or alignment ruler. Pressing names onto hoodies for a party? Here are some tips for planning custom bar mitzvah hoodies.

Can You Use an Iron Instead of a Heat Press?

A heat press is the recommended tool because it holds a steady temperature and applies even pressure across the entire design. A household iron has hot and cool spots and relies on hand pressure, which can leave parts of the transfer under-bonded. If you’re pressing more than a few pieces, or you want prints that last through many washes, a heat press is well worth it.

DTF Transfers vs. Other Heat Transfers

DTF isn’t the only heat-applied decoration, but it has a few clear advantages. Unlike heat transfer vinyl, DTF doesn’t require weeding, and a single transfer can reproduce full-color artwork, gradients and fine detail. Unlike sublimation, it isn’t limited to light-colored polyester, so it works on dark cotton tees, hoodies and blends as well. Heat-activated adhesive patches are another option, and our comparison of adhesive patches and DTF transfers shows when each one fits best.

Troubleshooting Common DTF Problems

• The design lifts when you peel. Let it cool longer, then lay the film back down and press again. If it keeps happening, check that your temperature, time and pressure are in range.
• Edges peel after washing. This usually means the transfer didn’t get enough heat or pressure. Don’t skip the post-press, and wait at least 24 hours before the first wash.
• Scorch marks or press lines. Use a cover sheet and stay within the recommended temperature range. A pressing pillow helps on garments with seams, zippers or pockets.
• A doubled or blurry edge. The film likely shifted during pressing. Use heat-resistant tape and avoid sliding the garment while the film is on.

How to Wash and Care for DTF Prints

• Wait at least 24 hours after pressing before the first wash.
• Turn garments inside out and wash in cold or warm water with a mild detergent.
• Skip bleach and fabric softener.
• Tumble dry on low or hang to dry.
• Don’t iron directly on the print. If you need to iron, turn the garment inside out or use a cover sheet.

DTF Transfer FAQs

Can I press DTF transfers on polyester?

Yes. DTF works on polyester and blends as well as cotton. Stay within the recommended temperature range and use a cover sheet, since some synthetic fabrics are more sensitive to heat.

Can I re-press a transfer that didn’t fully stick?

Yes. If an edge lifts during the peel, lay the film back down, cover it and press again for a few seconds before peeling.

How should I store transfers before pressing?

Keep unpressed transfers flat in a cool, dry place away from direct sunlight and humidity, and press them as soon as is practical for the best results.

Ready to Press Your Own Designs?

DTF transfers give you full-color, ready-to-press prints whenever you need them. Ninja Stitch prints DTF gang sheets in Downtown Los Angeles with vibrant color, a soft-touch finish and no minimums, and orders in by 1 PM can be printed the same day.

Setting up your first sheet? Start with our guide to preparing a DTF gang sheet, or see how DTF compares with DTG and screen printing. Prefer to have your garments decorated for you? Contact our team about custom apparel. We also decorate hats and polos with heat press transfers in-house.

Related reading:

• Heat Press Hats: Full-Color Designs for Custom Caps
• Heat Press Polos: Custom Polo Shirts with Full-Color Logos
• Heat Press Face Masks: Full-Color Designs for Events and Brands

This guide walks through exactly how to prepare a print-ready DTF gang sheet for Ninja Stitch, from file requirements to layout tips and the mistakes to avoid.

What Is a DTF Gang Sheet?

A gang sheet is one large piece of DTF transfer film with many designs arranged, or “ganged,” together. At Ninja Stitch, gang sheets are 23 inches wide by 36 inches long. You can fill that space with one design repeated many times or with a mix of different designs and sizes. A mixed sheet is also an easy way to print your NFT art collection on shirts. After printing, you cut each transfer apart and heat press it onto your garments.

Because you’re paying for the sheet rather than for each individual design, packing the sheet efficiently is the easiest way to lower your cost per print.

Ninja Stitch Gang Sheet File Requirements

• Sheet size: 23″ wide x 36″ long, print-ready.
• File type: PNG.
• Resolution: 300 DPI or higher.
• Background: transparent, with no white box behind your designs.
• Design size: every design placed at the exact size you want it printed.
• Spacing: about 0.25″ between designs so they’re easy to cut apart.

Double-check your sizing before you send the file. Your sheet is printed exactly as submitted, so artwork that’s the wrong size can’t be fixed after printing.

How to Build Your Gang Sheet, Step by Step

1. Gather your artwork. Collect high-resolution PNG files of every design. Images saved from websites or social media are usually too low-resolution to print sharply.
2. Remove the backgrounds. Make sure each design sits on a transparent background. Anything that isn’t transparent, including white, will print.
3. Size each design. Scale every design to its final print size before placing it on the sheet. The size guide below is a good starting point.
4. Create your canvas. In Adobe Photoshop, Illustrator or another design tool, set up a 23″ x 36″ document at 300 DPI with a transparent background.
5. Arrange and nest your designs. Place your largest designs first, then fill the gaps with smaller logos and tags. Rotate designs if it helps them fit, and keep about 0.25″ between each one.
6. Check the details. Zoom in to look for stray pixels, soft or semi-transparent edges and text that’s too thin to hold up.
7. Export and send. Save the sheet as a PNG at 300 DPI with transparency turned on, then upload it with your order.

Common DTF Print Sizes

Not sure how big to make each design? These common sizes are a good starting point for adult apparel:

• Left chest: about 3 to 4 inches wide.
• Full front or full back: about 10 to 12 inches wide.
• Youth front: about 7 to 9 inches wide.
• Sleeve: about 2.5 to 3.5 inches wide.
• Hat front: about 2 to 2.5 inches tall.
• Neck label: about 2 to 3 inches wide.

Always size for the garment you’re decorating. A design that looks great on an XL tee can look oversized on a youth shirt. Logos you plan to embroider need different prep, so here’s how logo digitizing for embroidery works.

How Many Designs Fit on One Sheet?

It depends on your design sizes, but here’s how the math works on a 23″ x 36″ sheet:

• Two 11-inch-wide full-front designs fit side by side across the 23-inch width.
• A 3.5-inch left-chest logo can repeat six times across one row, so a few rows add up to dozens of logos.
• Mixing sizes is the most efficient approach: big designs first, then smaller logos, sleeve prints and tags in the leftover space.

The sample layout above fits two full-front designs, three youth or back designs, 24 left-chest logos and a row of small prints on a single sheet.

Common Gang Sheet Mistakes to Avoid

• Low-resolution artwork: images that look fine on screen can print blurry or pixelated. Start with 300 DPI files at full size.
• Hidden backgrounds: a white or colored box around a logo will print exactly as it appears.
• Wrong sizes: designs print at the size they appear on your sheet, so measure carefully.
• Semi-transparent effects: soft shadows, glows and faded edges can print unevenly. Use solid colors or halftones instead.
• Text and lines that are too thin: very fine details may not transfer cleanly, so keep small text bold and readable.
• Mirrored artwork: submit your designs the way you want them to look on the garment. Don’t flip them.
• Wasted space: big empty areas on your sheet are prints you paid for but didn’t use.

After Printing: Cutting and Pressing

Once your sheet is printed, cut each design out with scissors or a rotary cutter, leaving a small margin around the edges. Then heat press each transfer onto your garment. Ninja Stitch recommends 260 to 300°F for 10 to 15 seconds, a cold peel and a quick 2 to 3 second post-press. For the full walkthrough, read how to apply DTF transfers.

DTF Gang Sheet FAQs

Can I put different designs on one gang sheet?

Yes. That’s the whole point of a gang sheet: you can mix logos, colors and sizes on the same sheet, as long as everything fits within 23 x 36 inches.

What if my design includes white?

White prints just fine with DTF, so white text or shapes in your design are no problem. Just make sure the background around your design is transparent rather than white.

Can Ninja Stitch arrange the sheet for me?

Yes. If you’d rather not build the layout yourself, upload your logos and the Ninja Stitch team can nest them onto a sheet for you, ready to press.

Need a Hand With Your Gang Sheet?

If you don’t have design software, or you’d rather leave the artwork to a pro, the Ninja Stitch graphic design team can help create or refine your designs. When your sheet is ready, order your DTF gang sheet. There are no minimums, and orders in by 1 PM can be printed the same day.

Still deciding on a print method? Compare DTF vs. DTG vs. screen printing to see which fits your project.

Related reading:

• How Can You Make Your Logo Design More Effective?
• Custom T-Shirt Printing: A Growing Demand in Los Angeles
• How Custom Design Shirts Benefit Your Business

Here’s a plain-English breakdown of DTF vs. DTG vs. screen printing from the team at Ninja Stitch in Downtown Los Angeles, so you can order with confidence.

The Short Answer

• Choose DTF for full-color designs, small or mixed runs, and garments made from cotton, polyester or blends.
• Choose DTG for soft, photo-quality prints on cotton tees, especially one-offs and short runs.
• Choose screen printing for larger orders with a few solid colors, where the price per piece drops as quantity goes up.

What Is DTF Printing?

DTF stands for direct-to-film. Your artwork is printed onto a special PET transfer film, first in full color and then with a layer of white ink behind it. An adhesive powder is applied and cured, which turns the print into a ready-to-press transfer. The transfer is then heat pressed onto the garment and the film is peeled away.

Because the design is printed on film first, DTF isn’t limited to one type of fabric, and you can fit many designs and sizes onto a single gang sheet. Ninja Stitch’s DTF gang sheets print on a 23″ x 36″ sheet with vibrant color and a soft-touch finish. There are no minimums, and orders placed by 1 PM can be printed the same day.

What Is DTG Printing?

DTG, or direct-to-garment printing, works like an inkjet printer for apparel. The printer applies water-based ink straight into the fabric, so there’s no transfer layer and the print feels very soft. DTG is excellent for detailed, photo-realistic artwork on cotton garments and for small orders where setting up screens wouldn’t make sense. It’s less suited to polyester and many synthetic blends. On cotton, though, DTG’s soft feel and fine detail are hard to beat.

What Is Screen Printing?

Screen printing pushes ink through a mesh stencil, called a screen, onto the garment, with a separate screen for each color. Setup takes time up front, but once the screens are ready the press runs quickly, which makes screen printing very cost-effective for larger quantities. It produces bold, durable color and is a favorite for uniforms, events and merch drops with simple, solid-color designs.

DTF vs. DTG vs. Screen Printing at a Glance

How Much Does Each Method Cost?

The cheapest method depends on your order, not just the technique. With screen printing, each color needs its own screen, so setup is spread across the order and the price per shirt drops as quantities grow. DTG has very little setup, which makes it efficient for one-offs and small batches, but every piece takes time on the printer. DTF is priced by the gang sheet, so the more designs and sizes you nest onto one 23″ x 36″ sheet, the more value you get from it.

As a rule of thumb, a large run of a simple design points to screen printing, a handful of photo-quality cotton tees points to DTG, and a colorful design across mixed garments and sizes points to DTF.

When DTF Is the Best Choice

• Your design has lots of colors, gradients or fine detail.
• You need a small quantity, or many different designs and sizes in one order.
• You’re decorating polyester, blends or accessories like totes.
• You want ready-to-press transfers you can apply yourself, whenever you need them.
• You’re on a deadline: gang sheets ordered by 1 PM can be printed the same day.

Planning your artwork? Our step-by-step DTF gang sheet guide explains how to set up a print-ready 23″ x 36″ PNG file at 300 DPI.

When DTG Is the Best Choice

Pick DTG for soft, highly detailed prints on cotton tees, such as photo artwork, one-of-a-kind gifts or a short run of designs for a pop-up. It also works well for building a collection on premium box tees. Learn more in What Is Direct-to-Garment (DTG) Printing?

When Screen Printing Is the Best Choice

Pick screen printing when you’re ordering larger quantities of the same design with a few solid colors, like staff shirts, event tees or team uniforms. The more pieces you print, the lower the cost per shirt. Read more about the benefits of screen printing t-shirts.

Don’t Forget Embroidery

For polos, hats, jackets and workwear, a stitched logo still delivers the most premium, long-lasting look. Ninja Stitch offers custom embroidery alongside DTF, DTG and screen printing, so you can mix decoration styles in one order, such as embroidered polos for staff and DTF-printed tees for customers.

Frequently Asked Questions

Which print method lasts the longest?

Screen printing is known for exceptional durability, and quality DTF transfers also hold up well to repeated washing when they’re pressed correctly. DTG prints stay vibrant with gentle care, such as washing inside out in cold water.

Can DTF transfers go on hats and bags?

DTF works on many fabrics and accessories, including totes and many hats, as long as the item can handle a heat press. For structured caps, embroidery is still the classic choice.

What do I need to apply DTF transfers myself?

A heat press is the best tool for the job. Our guide on how to apply DTF transfers walks through the recommended temperature, time and peel.

Not Sure Which Method Fits Your Project?

Send us your artwork, quantity and garment type, and the Ninja Stitch team will recommend the most cost-effective way to print it. Contact us for a quote, or order DTF gang sheets if you’re ready to press your own transfers.

Related reading:

• T-Shirt Printing in Los Angeles: Methods, Costs and Tips
• Mastering Screen Printing: Techniques, Trends and Tips
• Benefits of Direct-to-Garment Printing for Small Batches

Embroidery has come a long way over the years with the advent of new and more advanced machinery. With state of the art equipment, embroidering can now be done faster and more accurately. It has also led to people being able to make their own designs and create patches that suit their liking. Want to try it by hand? Start with five basic stitches for beginners.

For exquisite Stitches and Embroidery in Los Angeles, California, don’t think twice about partnering with NINJA Stitch. We specialize in custom embroidery, which will be discussed below.

Custom embroidery basically allows you to create your own designs, adding a more personal, distinct touch to them. It gives your garments a unique, one-of-a-kind flavor that is easily identifiable by your customers.

Companies prefer embroidery for many reasons, the main one being that it gives a professional appearance to robes, uniforms, aprons, casual wear, suits, and other apparel. It can also be done to bags, pillow cases, bed sheets, curtains, and lots of other items. Whatever you’re decorating, it helps to know how to choose the right embroiderer for the job.

Apparel You Can Customize with Embroidery

Clothing is where most embroidery projects start. These pieces are especially popular:

• Polos and button-downs: a left-chest logo is the go-to look for staff uniforms and client-facing teams.
• Hats and beanies: caps put your logo at eye level, and embroidered hats are a favorite for teams, events and merch.
• Jackets and outerwear: bombers, softshells and fleece can carry a large design on the back and a smaller logo on the chest.
• Hoodies and sweatshirts: thick fleece supports bold chest designs and lettering that hold up to years of wear.
• Team warm-ups: crests, names and numbers on warm-up jackets and quarter-zips give sports teams and clubs a pro look.
• Aprons, robes and workwear: durable fabrics that keep kitchen, salon and spa teams looking polished.

Bags, Towels and Other Items Beyond Apparel

Embroidery isn’t limited to clothing. Many of the most memorable custom embroidered items are things people use every day:

• Backpacks and totes: embroidered backpacks and canvas bags carry your logo to school, work and the gym.
• Towels: embroidered towels make great gifts and add a premium touch for gyms, spas, golf events and hotels.
• Shoes and sneakers: small names, initials or icons on canvas or knit sneakers create a truly one-of-a-kind pair.
• Sashes: pageants, graduations and celebrations often call for stitched lettering that looks sharp in photos.
• Home goods: pillowcases, blankets and table linens personalized with names, dates or monograms.

Specialty Embroidery Options

Beyond standard flat stitching, a few specialty techniques open up even more possibilities:

• 3D puff embroidery: foam under the stitches creates a raised, bold design that is popular on snapbacks and streetwear caps.
• Custom patches: embroidered designs with sew-on, adhesive or velcro backings for jackets, bags, hats and gear. Explore our custom patches for ideas.
• Same-day embroidery: need something fast? Ask about same-day embroidery in Los Angeles when a deadline is tight.

Not sure which option suits your item? Our team can recommend the right technique when you share your design.

The Advantages of Personalized Embroidery

What makes custom embroidery a beneficial choice? But before we get to that list, it’s important to note that large orders make for a more cost-effective venture. Having only one or a few items embroidered is going to cost you a lot more in terms of price per item.

• Gives your items a clean and professional look.
• It’s applicable to different kinds of materials.
• It typically outlasts other decoration techniques.
• It’s available in a variety of colors.
• No problems when it comes to washing or laundering.

Perhaps the only disadvantage is that it’s more expensive for small orders. But that’s not too bad considering the tons of benefits it can bring.

When a DTF Print Is the Better Choice

Some items and designs simply suit printing better than stitching. Thin performance tees, very large designs and artwork with photos, gradients or dozens of colors are good candidates for DTF transfers. They’re printed on film with a white layer, so colors pop on both dark and light garments, and they press onto cotton, polyester and blends. Many customers pair embroidered caps and polos with DTF-printed tees for the same event.

Custom Embroidered Items FAQs

How many thread colors can a design have?

Most designs can include several thread colors, but simpler palettes usually stitch more cleanly. If your artwork relies on gradients or photo detail, a print may be the better match.

Can I put the same design on different items?

Yes. Once your design is digitized, it can be stitched on polos, caps, bags and more. Some items need a resized version so the design fits the available space.

Are some items hard to embroider?

Yes. Very thin, stretchy or slippery fabrics, and items with seams, pockets or hardware in the way, can be tricky. In those cases a patch or a print is often the easier route.

Which embroidered items make the best gifts?

Towels, robes, caps and totes are easy wins because they don’t depend on clothing sizes. Add a name, initials or a meaningful date for a personal touch.

What’s the difference between direct embroidery and a patch?

Direct embroidery is stitched straight into the item. A patch is stitched separately and then attached, which makes it easy to add the same design to many different items or move it later.

For more information on custom embroidered items, don’t hesitate to contact the Ninja Stitch team for a quote. We look forward to showing you how great of a technique embroidery is for branding the items you’re selling, giving them a more unique and personal flavor that is easily relatable to your target market. Choose us if you want to get more creative and professional with your designs.

What other ways have you benefited from custom embroidery? Feel free to tell us in the comment section.

Related reading:

• The Advantages of Custom Embroidered Clothing
• How Can Custom Embroidery Help My Business?
• Build Brand Awareness with Trendy Embroidered Apparel

Any of these stitches could be your favorite, not only because they’re the easiest to do, but because they are practical and decorative as well. Start laying the foundations of your stitch knowledge today.

You can count on NINJA Stitch for quality Stitches and Embroidery in Los Angeles, California.

5 Basic Embroidery Stitches Every Beginner Should Know

• Backstitch
  Let’s start you off with the backstitch, which is perhaps the most useful when it comes to learning embroidery. You’re basically able to make anything using this stitch. You can use it to make monograms, outlines, and simple designs. Plus, not only is the backstitch easy to learn, it’s an amazing confidence booster for any beginner out there.
• Straight stitch
  Very similar to the backstitch, the straight stitch serves as one of the foundations of embroidery and is arguably the easiest to do. It basically allows you to create flowers, stars, and more simple designs in any direction, from a single stitch.
• Seed Stitch
  This type of stitch is characterized by a slew of randomly-directed, isolated straight stitches and backstitches that are spaced according to your goal or the design you wish to achieve. This would be the ideal stitch to use for expansive fabrics and garments. You can also create darker patches by sewing stitches more closely or spacing smaller ones farther apart.
• Running Stitch
  Resembling a dashed line, the running stitch serves as the perfect decorative border. One of the best things about it is that it makes for a great foundation for adding other stitches onto. Running stitches are either small or bigger stitches of equal length, spaced equally apart.
• Lazy Daisy or Detached Chain Stitch
  You can create a lot of fun designs with this stitch because of its “petal” or “leaf-shaped” attribute. If you plan on giving your designs a floral or botanical touch then the detached chain stitch would be perfect.

Supplies You Need to Start Hand Embroidery

You don’t need much to get started. A basic kit includes:

• Embroidery hoop: a 6-inch hoop is a comfortable size for most beginner projects and keeps your fabric taut.
• Fabric: a tightly woven cotton or linen is the easiest to stitch on.
• Embroidery floss: six-strand cotton floss comes in hundreds of colors and can be separated for finer lines.
• Needles: embroidery (crewel) needles have a larger eye that makes threading floss easier.
• Small, sharp scissors: for clean cuts close to the fabric.
• A thimble (optional): protects your fingertip when pushing the needle through thicker fabrics.
• A water-soluble pen: for marking your design; the lines rinse away when you’re done.

Tips for Your First Embroidery Project

• Start small and simple: a name, a flower or a short word lets you practice each stitch without getting overwhelmed.
• Keep your fabric taut: tighten the hoop until the fabric is drum-tight so your stitches stay even.
• Work with shorter thread: about 18 inches of floss at a time helps prevent tangles and knots.
• Keep stitch length consistent: even stitches look neater, especially with backstitch and running stitch.
• Practice on scraps: try each new stitch on spare fabric before adding it to your project.
• Don’t pull too tight: overly tight stitches pucker the fabric around your design.

Hand Embroidery vs. Machine Embroidery

Hand embroidery is a relaxing craft and perfect for one-of-a-kind gifts, but it takes time, and every piece turns out a little different. Machine embroidery uses a digitized stitch file to reproduce the same design quickly and consistently, which is why businesses, teams and brands rely on it for uniforms, caps and merch. Machine embroidery also opens up options that are hard to do by hand, like raised 3D puff lettering on caps or the same logo on dozens of shirts. Curious what else is possible? Here are the items you can customize with embroidery, from apparel to bags and towels.

If you love a design you’ve stitched by hand and want it on a set of hats or shirts, custom embroidery from a professional shop can turn it into a stitch file and reproduce it on every piece. Weighing it against printing? Here’s when embroidery is the right choice.

Turn Your Sketches into Full-Color DTF Prints

Not every design needs to be stitched. If you’ve drawn or painted artwork you’d like to see on a tee, tote or hoodie, scan it at high resolution and have it printed on DTF gang sheets. DTF reproduces shading, watercolor washes and fine linework in full color, and there are no minimums, so you can print just one sheet of your designs. Our guide on how to apply DTF transfers shows how to press them with a heat press.

Beginner Embroidery FAQs

What’s the easiest embroidery stitch to learn?

The straight stitch and running stitch are the simplest, since each is just the needle passing up and down through the fabric. Once you’re comfortable, the backstitch is a natural next step.

How many strands of floss should I use?

Most floss has six strands. Two or three strands work well for fine lines and lettering, while all six create bold, textured stitches.

How do I transfer a design onto fabric?

Trace it with a water-soluble pen against a sunny window or light box, or print it on a wash-away stabilizer and stitch right through it.

How do I finish the back of my embroidery?

Weave your thread ends under a few stitches on the back instead of tying big knots. This keeps the back flat and stops the front from looking lumpy.

Can I wash hand-embroidered items?

Yes, gently. Hand wash in cool water with mild soap, roll the piece in a towel to remove excess water and let it dry flat.

Find out more about basic embroidery stitches and Screen Printing Services in California by getting in touch with the Ninja Stitch team. We hope to hear from you soon! Please feel free to share your ideas and suggestions in the comment section below.

Related reading:

• 3 Tips for Finding the Best Embroiderer for You
• How Can Custom Embroidery Help My Business?
• 3 Tips for Saving Money on Custom Embroidery

6 Ways Embroidered Apparel Builds Brand Awareness

• Make A Splash At Your Next Company Event
  When you give out polo shirts, bags, and hats, with your custom embroidered logo, people take notice. The next time you have a company event, think like a consumer. Do you want to bring in serious customers? Do you want them to remember your brand? Consider handing out promotional apparel they will actually want to wear.

• Show Your Customers that Your Employees Are A Team
  One of the most important things you can do to build brand awareness is to have a team atmosphere. When all your employees are wearing the same uniform, it gives your name credibility. It also helps customers recognize who works for you. When you order employee uniforms with your logo, you are sending an important message. This is your company and you are proud of the people and the hard work that went into building it.

• The Right Gear For Your Company Sports Teams
  If your company has a great baseball or softball team, show them off with matching hats and shirts. Let everyone in the stands see your brand. It will also help keep team morale up when everyone is wearing the same gear during practice and at the big games. When you post pictures of the events on social media, the entire world will see your embroidered logo. These events are also great opportunities to hand out promotional apparel to future clients, and customers. Need your logo on team jackets and gear bags too? Here are the main advantages of embroidered patches.

• Put Your Embroidered Brand Name on Fundraising Apparel
  When you decide to donate free merchandise to raise money, put your name on it. The next time you set up a booth at a charity walk or other fundraiser, hand out large reusable bags with your brand embroidered across the front. The participants will thank you for giving them something they will be able to use now, and every time they go shopping.

  Another promotional item participants will love is athletic caps and visors. This way they can enjoy the run or walk, without worrying about the bright sun. They will gladly wear a cap with your brand. Be sure to order enough, they won’t last long on hot sunny days.

• Detailed, Custom Embroidery Is On Trend
  Branding embroidery is growing in popularity thanks to celebrities and big fashion brands. Department stores are filled with jeans, jackets, and other apparel with beautifully embroidered detail. Make sure your brand keeps up with these trends. If customers are already wearing this trend and shopping for them, your company needs to follow suit. Patches offer another way to join in; see how branded patches showcase your logo.

• Giveaway Gifts Through Social Media That Your Followers Want to Share, Like, and Comment On
  When you let your social media followers know that you’re giving away a free shirt to loyal followers, you will build your brand. You will also gain more attention on Facebook, Instagram, LinkedIn, and Twitter. Don’t let this valuable brand building opportunity fall short. Order promotional apparel that will wow and grow your business.

How to Plan an Apparel Giveaway People Will Keep

A little planning turns a pile of giveaway shirts into pieces people wear for years:

• Know your audience: think about who will receive the item and where they’ll wear it, whether that’s a 5K, a trade show or a client appreciation night.
• Pick easy-to-wear items: caps and totes fit almost everyone, while tees, hoodies and polos need a range of sizes.
• Plan your size mix: for apparel, a spread weighted toward the middle sizes is a common starting point, adjusted for your crowd.
• Order a few extras: popular items go fast, and a small buffer covers walk-ins, staff and future events.
• Time it right: share your event date early so there’s room for design, proofs and production.

Design Tips for Apparel People Want to Wear

• Keep the logo tasteful: a modest chest logo or tone-on-tone design is more likely to be worn again than an oversized print.
• Choose wearable colors: neutrals like black, heather gray, navy and cream are easy to style and suit most brands.
• Invest in quality blanks: soft, well-fitting garments become favorites, which means more people see your brand.
• Add a detail worth noticing: a sleeve hit, a short slogan or raised lettering on a cap makes the piece feel like merch rather than a freebie.

Full-Color DTF Tees for Big Crowds

Embroidery is perfect for premium giveaways like polos, caps and jackets. For crowd-sized events where you need full-color tees, sponsor logos or several design versions, DTF gang sheets let you nest everything on one sheet with no minimums, and orders in by 1 PM are printed the same day. For very large runs of a simple one- or two-color design, screen printing is usually the most economical option. Many brands mix all three: embroidered pieces for staff and VIPs, printed tees for everyone else.

Embroidered Promotional Apparel FAQs

Which embroidered items do people wear most?

Caps, hoodies and quality tees tend to get the most everyday wear because they’re casual and easy to style. Polos and jackets are great choices for staff and VIP gifts.

Can we add a sponsor’s logo next to ours?

Yes. Co-branded apparel is common at fundraisers and tournaments. Keep both logos balanced in size and leave space between them so each one reads clearly.

How can we tell if branded apparel is working?

Watch for photos and tags on social media, and consider a unique hashtag on your event signage. Over time, you’ll see which pieces people keep wearing and asking for.

What should we do with leftover apparel?

Give extras to staff, use them as social media prizes or save them for your next event. Designs without a specific date stay useful much longer.

Whether your company is new or it has stood the test of time, you still need to consider brand awareness. The more people see your custom logo, the more they will remember it. NINJA Stitch is your go-to supplier for the best corporate clothing and branded apparel. Our team has everything you need to build your brand. Request a quote for embroidered promotional apparel and we’ll help you choose pieces your audience will love.

Related reading:

• Reasons to Embroider Your Company’s Name on Apparel
• The Advantages of Custom Embroidered Clothing
• 4 Key Benefits of an Embroidered Company Logo on Your Uniform

4 Benefits of Personalized Gifts

We can personalize all items so they match the preferences of the person you are giving them to. Here are some benefits of personalized gifts:

1. Adds a Personal Touch
   Have a personal touch to every gift that you give. For instance, do you want to give your family matching shirts or hats for a special occasion? With our screen printing services in California, we can screen print your family insignia, photo, or names on shirts and hats! This way, everyone matches and it adds a special style to what everyone is wearing.

2. Suits Any Occasion
   With multiple occasions throughout the year, finding the perfect gift can be very stressful. Our customized items from NINJA Stitch can be used for any event – be it for a wedding, birthday, graduation, corporate event, or some other occasion.

3. Builds Stronger Personal Connection
   When you give someone something that is made personally for them, it becomes more than just a gift – it shows how much you appreciate them that you’re going the extra mile to give them something unique and personal. For instance, if your friend is a fan of wearing baseball hats, you can make your gift extra special by having us embroider their name, favorite logo or quote, on the hat.

4. Great Marketing Strategy
   If you want to further advertise your company, you can personalize marketing products, such as pens, t-shirts, hats and towels, with your logo and name. You can also give out these personalized products to your clients. Customers enjoy and appreciate these gestures and they tend to stick with the company because they feel appreciated. Here’s a closer look at what corporate gifting can do for your company.

Make Gifts Extra Special

With our help, we can turn even the simplest items into a personalized gift. We make it super convenient for you too – no more store hopping, no more settling on a common item because you have no other options, and no more frustrations trying to decide which gift is suitable for the occasion!

Personalized Gift Ideas for Every Occasion

Not sure where to start? These personalized gift ideas work for the most common occasions:

• Weddings: embroidered robes, towels or totes with names and the wedding date for the bridal party and groomsmen.
• Birthdays: a hoodie or cap with a name, nickname or inside joke they’ll actually wear.
• Graduations: a jacket, sweatshirt or embroidered sash with the graduate’s name and class year.
• New babies: a blanket or towel stitched with the baby’s name and birth date.
• Retirements and promotions: a premium jacket or quarter-zip with their name and a meaningful date.
• Teachers and coaches: a tote or cap with a thank-you message from the class or team.
• Holidays and reunions: matching family shirts or caps for photos and get-togethers.

Planning Personalized Gifts for a Group

Group gifts for a bridal party, a team or a family reunion are easier with a little organization:

• Pick one core design: a shared logo, date or theme keeps the set cohesive.
• Add individual names or initials: each person gets a piece that feels like their own.
• Collect details in one list: gather names, sizes and color choices before you order.
• Order a spare or two: extras cover last-minute guests and give you a keepsake of your own.

How to Personalize a Gift So It Gets Used

• Pick something they already love: a cap for the hat collector, a tote for the farmers market regular, a towel for the golfer.
• Keep it subtle: initials or a small name on the chest, cuff or corner often look more elegant than a large design. The same goes for sneakers; see where embroidery looks best on shoes.
• Choose colors they wear: match the garment and thread to their style, not just your favorite colors.
• Add meaning: a date, a nickname, coordinates or a short quote turns an everyday item into a keepsake.
• Check sizes discreetly: peek at the tag on a favorite shirt, or choose items like caps, towels and bags that don’t need a size.

Full-Color Photo Gifts with DTF Transfers

Embroidery is perfect for names, initials and logos, but it can’t reproduce a photograph. For family photos, pet portraits or colorful artwork, DTF transfers print the image in vibrant full color, ready to press onto shirts, hoodies and tote bags. There are no minimums, so you can print one design or a whole sheet of different photos for a family reunion. Pair a DTF photo tee with an embroidered cap for a gift set that’s truly one of a kind.

Personalized Gift FAQs

Is personalization a good idea for client gifts?

Yes. A useful item with the client’s name feels more thoughtful than a standard logo giveaway. Keep your own branding subtle so the gift feels personal.

What details should I double-check before ordering?

Spelling of names, dates, sizes and thread colors. Review your digital proof carefully, since personalized items are made exactly as approved.

What’s a good personalized gift for someone who’s hard to shop for?

Choose a practical item they’ll use every day, like a quality cap, a tote or a plush towel, with a subtle name or monogram. Useful beats flashy for the person who has everything.

How far ahead should I order a personalized gift?

Give yourself as much lead time as you can, especially before weddings and holidays. Share your date when you request a quote so the team can plan around it.

When it comes to stitches and embroidery in Los Angeles, California, we are your most trusted experts. Plan your personalized gift with our team and we’ll help you choose the perfect item, design and colors.

Related reading:

• Father’s Day Made Special with Memorable Embroidery Gifts
• Custom Embroidered Sashes for Graduations, Pageants and Weddings
• Embroidering Allbirds Shoes: Custom Designs, Tips and Care

4 Reasons Promotional Products Pay Off

• It provides low-cost, yet effective marketing

  When you’re a small business, getting your brand recognized by the general public can sometimes be a bit difficult.

  For one, advertising can be expensive (even more so if you intend to spread the word through different media). But don’t worry, even as a startup, public recognition is something that you CAN achieve.

  All you need to do is execute an efficient marketing strategy such as gifting giveaways. It’s a cost-efficient solution to your dilemma! If you must know, most manufacturers of promotional products actually keep the prices affordable for the sake of mass production.

  Once you have products readied, you can step up the appeal of your giveaway by adding your brand logo! As a diligent service provider of Stitches and Embroidery in Los Angeles, California, we can definitely help you with that!

• It offers instant brand recognition

  Your gift of promotional items makes recipients more aware of your brand. And when that happens, your business will be able to gain more customers as well. But how will you exactly attempt instant brand recognition? Well, we have a solution for you.

  Nothing says instant brand recognition like Custom Embroidery. It’s fancy, intricate, durable, and readable. It sets your business logo apart from the giveaway item in the same way embossed lettering does on signboards (perhaps, even better). Even from a distance, it’s distinguishable! And since it’s sewn into the fabric, it can easily withstand the wear and tear of constant use; leaving your business logo intact through the years.

• It presents better exposure for your business

  When you see a billboard by the road, how long does it hold your attention? Probably a few seconds or so before the traffic light turns green, right? But once you’ve passed the signage, the ad display will have had left your mind.

  However, when you decide to promote your brand through a giveaway, the impact on a consumer is longer lasting. The reason behind it is that promo items are often used rather than simply put in the display.

  Say, for example, you decided to select a printed shirt or an embroidered bag from NINJA Stitch as a promo item. If a recipient of the said item uses it on a day-to-day basis, they can expose their acquaintances to your brand as well.

• It doubles as a business card, but better

  A business card functions to introduce your company, along with its product or services to potential consumers. But, unlike a business card that is often stowed away in a wallet, promo items get used daily and present your company’s business information at the ready.

Plus, it helps you gain better customer loyalty too! Just be sure to select well-made items for your giveaway as consumers often relate your gift products with the quality of your business. Custom giveaways can also strengthen client relationships and boost employee morale.

How to Choose Promotional Products People Actually Use

The best giveaway is one that leaves the event with your customer and stays in their routine. Keep these guidelines in mind when you plan your next order:

• Match the item to your audience. Tech-savvy crowds love phone accessories like custom PopSockets, outdoor brands do well with hats and towels, and corporate clients appreciate quality polos and jackets. Targeting a campus crowd? See which promo apparel college students actually wear.
• Prioritize everyday usefulness. Bags, hats, tees and pens get used over and over, which means more impressions for your logo.
• Pick the right decoration. Embroidery gives polos, hats and jackets a premium, durable finish. Screen printing is cost-effective for large runs of tees, and DTF handles full-color artwork with no minimums.
• Keep your branding simple. A clean logo and one short message are easier to recognize at a glance.
• Choose quality over quantity. A well-made item reflects well on your business. A cheap one that breaks after a week does the opposite.

Promotional Product Ideas for Every Occasion

• Trade shows and conferences: tote bags, pens and lanyards that attendees can put to use right away.
• Employee onboarding: branded polos, hats and jackets that double as everyday uniforms.
• Customer appreciation: premium gifts like embroidered towels or custom jackets that feel personal.
• Grand openings: branded hats and tees for your team, plus pens and phone grips for the first customers through the door.
• Community events and sponsorships: full-color tees and hoodies that turn your supporters into walking billboards.

Full-Color Promo Apparel Without the Minimums

Promotional products work best when people actually use them, and apparel gets worn again and again. For giveaways that need a full-color logo, gradients or photo-quality artwork, DTF transfers from Ninja Stitch deliver vibrant color with a soft-touch finish on tees, hoodies, totes and more.

Because there are no minimums and orders placed by 1 PM can be printed the same day, DTF is a practical way to stock up for a trade show, product launch or community event on short notice. Weighing your options? See how DTF compares with DTG and screen printing.

Promotional Products FAQs

How many promotional items should I order?

Start with your expected headcount or customer list, then add a buffer for walk-ups, new hires and reorders. For apparel, DTF transfers have no minimums, so you can print a small batch now and restock as needed.

Which promotional products last the longest?

Wearables and everyday carry items, such as hats, jackets, bags and towels, tend to stay in use the longest, which keeps your logo in front of people for months or even years.

How far ahead should I order?

Give yourself as much lead time as possible for large or embroidered orders, especially before busy seasons and big events. If you’re in a hurry, DTF gang sheets ordered by 1 PM can be printed the same day.

Ready to put your logo in more hands? Contact Ninja Stitch for ideas and a quote on promotional products that fit your budget.

Related reading:

• 5 Rewarding Benefits of Promotional Products
• Custom Promotional Sunglasses: Why Your Company Should Use Them
• Four Advantages of Personalized Promotional Items

Stores in the real world are quickly catching up to their digital counterparts, looking to offer customers an experience tailored exclusively for them. A company’s goal to bring a level of personalization into every product or service doesn’t just earn them the customer’s satisfaction; it earns them their loyalty as well. Through these methods, businesses are able to build much stronger bonds with their target audiences. The same shift shows up in the workplace, where corporate apparel has evolved toward comfort and personalization.

The brands around the Los Angeles Fashion District are very much aware of how customization brings added value for customers. When properly planned out and strategized, personalization can earn both big and small businesses, alike, the big bucks.

NINJA Stitch is a stand-out provider of Embroidery in Los Angeles. Here’s our take on why businesses these days should go for product customization.

4 Advantages of Product Customization

1. Stand out from their competitors

   Whether they’re buying shoes, bags, shirts, or pants, customers always look for something that matches their particular needs and preferences. When you design your products around these important elements, customers will no doubt gravitate towards your company. Why? Because you’re giving them something distinct that none of your competitors are able to offer.

2. Get a deeper insight on what customers need

   Buying habits, customer data, and consumer trends are all valuable information for any business. Having an insight into target consumer behavior gives your company a huge competitive advantage. You see, sometimes, customers themselves don’t even know what they want until they are given the chance to have a hand in the manufacturing of the products. This is exactly what you’re giving them: the opportunity to tailor products to meet their unique needs and preferences.

3. Increase sales

   When you allow customers to customize products, you don’t just get higher sales, you’re able to keep your customers happy and even earn their loyalty. Research has also found that many shoppers are willing to pay more for a product or service tailored to them.

4. Improve customer loyalty

   When you’re consistently able to accommodate the unique tastes of a customer, you make them happy and satisfied. More importantly, you earn their loyalty.

You can implement various tactics for product personalization. NINJA Stitch, for instance, puts emphasis on Fast Embroidery in Los Angeles to cater to the increasing demands of our trendy and well-informed citizens. Giveaways are another tactic worth trying; here’s why personalizing promotional items pays off.

Ways to Offer Customization to Your Customers

Product customization doesn’t have to mean one-off pieces for every buyer. Brands use a range of approaches:

• Names and initials: monograms on bags, towels and caps turn a standard product into a keepsake.
• Choose-your-color options: offer one design in a few garment and thread colors so customers can pick their favorite.
• Limited editions: small runs for seasons, holidays or local events create urgency and give fans something new to collect.
• Event and location editions: add a city, date or event name to a core design for pop-ups, tournaments and tours.
• Mix-and-match patches: let customers add custom patches to jackets, hats and bags for a look that’s all their own.
• Team and group orders: one design personalized with each member’s name for clubs, offices and families.
• Co-branded collaborations: partner with another local business or creator on a shared design.

How to Start Small with Custom Products

You don’t need a big inventory to test customization. Start with one or two products your customers already love, such as an embroidered cap or a branded tote bag, and offer a simple personalization option. Track which colors and designs sell, then build your line around what works. Ask early customers for feedback, too; they will tell you which options they value most. Producing in smaller batches also protects your cash flow and reduces leftover stock.

Use DTF to Test Custom Designs Without Minimums

One of the easiest ways to experiment with product customization is with custom DTF gang sheets. Because there are no minimums, you can print several designs, colorways or personalized versions on a single 23″ x 36″ sheet, press them onto tees, hoodies and bags as orders come in, and see what customers respond to before committing to larger runs. Orders in by 1 PM are printed the same day in DTLA. Our guide on how to prepare a DTF gang sheet walks you through setting up your file.

Product Customization FAQs

What products can be customized?

Almost anything your customers wear or carry: tees, hoodies, caps, jackets, bags, towels and patches, plus promotional items like pens, lanyards and sunglasses.

Is product customization expensive?

It doesn’t have to be. Costs depend on the decoration method, the quantity and how much each piece varies. DTF and small batches keep testing affordable, while larger runs lower the price per piece.

How do I collect personalization details from customers?

Add a simple form or note field at checkout for names, initials or color choices, and confirm spelling before anything goes into production.

Can I offer customization in an online store?

Yes. Many brands take personalization requests on their website and batch orders for production. A short list of options, such as a few fonts and thread colors, keeps things simple for customers and production alike.

Does customization work for B2B companies too?

Yes. Businesses customize uniforms by role, create co-branded gifts for clients and add event names to giveaway items.

Ready to add customization to your product line? Talk to Ninja Stitch about custom products and our team will help you choose items, decoration methods and quantities that fit your plans.

Has a company ever given you the privilege to customize a product so that it meets your particular tastes? Please feel free to share your experience in the comment section.

Related reading:

• Four Reasons to Use Custom Cannabis Packaging
• How Can You Make Your Logo Design More Effective?
• 4 Reasons to Invest in Cannabis Packaging Design

How to Advertise Through Giveaways in 5 Steps

1. Select the Proper Item

Giveaways are great in general, but you have to select one that is coherent with the nature of your business. After all, your main goal in offering giveaways is to advertise your product or service. Apart from selecting the appropriate giveaway item, you should also consider marking it with your brand or business logo. If you’re unsure where to start, a reusable tote is a versatile pick; here’s why branded bags make smart giveaways.

Say, for example, you have a restaurant at the beach. A great giveaway item that you can offer would be a beach towel that has your brand logo embroidered on it. Or, if you have a fitness gym, you can have a headband that has your embroidered logo as a giveaway. Having items like these made is no hassle at all! Our team can put your logo on promotional towels, headbands, hats and other giveaway items. Check in with one of our representatives today. We’ll be more than happy to discuss your options with you.

2. Determine the Qualified Recipients

Now that you have decided on a gift item, it’s time to create criteria for who is eligible for the giveaway. For this, you have many options to choose from.

For instance, you can:

• Gift giveaways to new customers.
• Gift giveaways to loyal customers who have patronized your business for years.
• Gift giveaways as a part of a seasonal promo period.
• Gift giveaways as a thank you to clients who have joined your business’ mailing list.

The choices are truly endless. Feel free to craft your very own strategy and put it into practice. Once you have made a decision, you can ask us to provide custom embroidery or printing for your giveaway items.

3. Promote the Giveaway

You’ve set the mechanics. You’ve readied the promotional items. With those done, you can proceed to the next step: telling the world about your promo. How do you accomplish that?

Well, here we have a couple of suggestions for you:

• You can advertise it on your website.
• You can post about it on your social media business accounts.
• You can add posters about it at your shop.
• You can spread the word about your promo through the newspaper, local radio, and even on TV.
• You can announce it in your email newsletter so loyal customers hear about it first.

4. State the Limits for the Giveaway

After you have accomplished the steps above, don’t forget to set limits, such as a total quantity, one item per customer or a clear end date. This will keep your promotion in check and prevent it from going over budget.

5. Track the Results

Consider incorporating a redemption code in your campaign. This will help you determine the success of your promo. If your current strategy has assisted you in reaching your sales goals, you can do something similar in the near future. You can also track new email sign-ups, social media followers or uses of a campaign hashtag.

Giveaway Ideas for Different Types of Businesses

The best giveaway is something your customers would happily buy for themselves. Here are a few pairings that tend to work well:

• Restaurants, cafes and bars: branded tees or hats for regulars, plus tote bags for takeout fans.
• Gyms and fitness studios: sweat towels, headbands and hoodies that members bring to every workout.
• Retail shops and boutiques: reusable promotional bags that show off your logo every time a customer runs errands.
• Real estate and professional services: pens and phone grips to hand out at open houses and client meetings.
• Tech companies and startups: hoodies, hats and PopSockets that fit right into a daily routine. See how branded phone grips advertise your business.
• Summer and outdoor events: sunglasses, hats and towels that people put to use on the spot.

Online Contests vs. In-Person Giveaways

You can run a giveaway online, in person or both, and each format advertises your business in a different way:

• Online contests: ask people to follow your account, tag a friend or join your email list for a chance to win. A few high-value prizes, such as a branded hoodie or jacket, usually create more excitement than a pile of small items.
• In-person giveaways: hand out items at your store, a pop-up, a trade show or a community event. People can see and feel the quality, and you get a face-to-face moment to talk about your business.

Whichever format you choose, write clear rules that explain who can enter, how winners are picked and when the giveaway ends, and check the promotion guidelines of any social platform you use.

Time Your Giveaway for Maximum Exposure

When you run a giveaway matters almost as much as what you give away. Tie your promotion to a moment when people are already paying attention:

• Grand openings and anniversaries: reward the first customers through the door and give them a reason to come back.
• Product or menu launches: a limited-edition item builds buzz around something new.
• Local events and sponsorships: branded items at a 5K, street fair or school fundraiser put your logo in front of the whole community.
• Slow seasons: a gift-with-purchase offer can bring in traffic during months when business usually dips.

Limited-Edition Prize Tees with DTF Printing

For contest prizes and limited runs, apparel is hard to beat, and custom DTF gang sheets make small batches practical. You can print a full-color design for just a handful of winners with no minimums, and orders placed by 1 PM can be printed the same day. Since one 23″ x 36″ sheet can hold several designs, you can fit a prize shirt, a staff tee and a tote bag design on the same order. Our guide on how to prepare a DTF gang sheet explains the file setup.

Giveaway Advertising FAQs

What makes a good prize for a social media giveaway?

Choose something your audience genuinely wants and can’t get anywhere else, like a limited-edition hoodie or hat with your logo. A prize that photographs well also encourages winners to share it.

Can a small business afford to advertise through giveaways?

Yes. Start with a modest quantity, set clear limits and focus on one or two channels. A few dozen well-made items in the right hands can keep working for your brand long after a short-lived ad has ended.

Should every giveaway recipient get the same item?

Not necessarily. Many businesses offer a small item to everyone who takes part and save a premium piece, like an embroidered jacket or polo, for top customers or contest winners.

Ready to plan your next promotion? Contact Ninja Stitch about branded giveaway items, and our team will help you choose products and decoration that fit your audience and budget.

Related reading:

• Corporate Giveaways with Quicker Turnaround Times
• How Custom Promotional Giveaways Benefit Your Business
• Corporate Gifts: The Benefits They Bring Your Business